LightBlog

Sunday, 13 October 2013

Asha 303 Handsfree Solution


In this article I will explain Solutions of Nokia Asha 303 Handsfree Activated problem. If your phone is suffering from this problem your Nokia Asha 303 will stop using it’s Speaker and Microphone. Because phone will be directing all audio to handsfree connector. So if your phone shows a headphone sign on screen and it’s earpiece and mic stops working don’t panic there is a moderately simple solution. I will explain every step and post the diagram below.
  1. Clean The Area around Handsfree Connector on Motherboard
  2. Remove Purple Marked IC and make the Jumpers
  3. Replace the black marked Crystal IC

Clean The Area:

First of all you should clean the area around the Handsfree Connector of the motherboard because almost 60% of handsfree problems occur because of Shortage, Moisture or Carbon not just Nokia Asha 303 but most of the Cell Phones. So there is a strong chance your problem will be solved by just cleaning it. I have marked the general area with RED border line.

Remove IC and Jumper:

If cleaning doesn’t work Remove the IC I have marked in PURPLE and jumper it’s left and right points as shown in the diagram below.

Replace the IC:

If cleaning and Jumper both don’t work you can replace the IC I have marked in BLACK your problem will be most likely solved.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Here Are Nokia Asha 303 Handsfree Activated Problem Solutions. Please Observe Carefully.
Nokia Asha 303 Hadsfree Problem Solution
Do Solutions Step by Step as Shown

If you have further Questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

No comments:

Post a Comment

Adbox